Ergonomic workspaces 02-2020

133 Ergonomic workspaces product catalog www.treston.us Concept™ Workstation - Hand Crank • Pair of legs of crank frame can support 440 lb dynamic load, and 1100 lb static load, evenly loaded. • Frames are available in depths of 23.6”, 29.5” and 35.43" • Frames are available in widths of 39.4“, 47.2”, 59.1” and 71.1”. • Height adjustment of crank frame is 27.6”-41.4” with 1” table top. • The crank handle can be installed on the left or right side of the frame. Standard table configuration is right hand crank. • Height adjustment change one inch per each full rotation of the crank handle. • The crank folds away under the frame when not in use. Concept™Workstation Frame - Hand Crank 24 x 48 30 x 48 24 x 60 30 x 60 24 x 72 30 x 72 A 47.24" 47.24" 59.06" 59.06" 70.86" 70.86" B 23.33" 29.07" 23.33" 29.07" 23.33" 29.07" C 40.78" 40.78" 52.60" 52.60" 64.41" 64.41" D 40.11" 40.11" 51.93" 51.93" 63.74" 63.74" E 10.52" 16.44" 10.52" 16.44" 10.52" 16.44" F 11.43" 11.43" 11.43" 11.43" 11.43" 11.43" G 23.54" 29.52" 23.54" 29.52" 23.54" 29.52" H 11" 18.28" 11" 18.28" 11" 18.28" I 9.26" 9.26" 9.26" 9.26" 9.26" 9.26" J 26.82-40.60" 26.82-40.60" 26.82-40.60" 26.82-40.60" 26.82-40.60" 26.82-40.60" K 5.5" 5.5" 5.5" 5.5" 5.5" 5.5" *K 1 2.87" 2.87" 2.87" 2.87" 2.87" 2.87" L 8.06" 8.06" 8.06" 8.06" 8.06" 8.06" *K 1 - Low Profile caster option. PRODUCT SPECIFICATIONS Concept™ Workstations Concept™Workstation Frame - Manual 24 x 48 30 x 48 24 x 60 30 x 60 24 x 72 30 x 72 A 47.24" 47.24" 59.06" 59.06" 70.86" 70.86" B 23.33" 29.07" 23.33" 29.07" 23.33" 29.07" C 40.78" 40.78" 52.60" 52.60" 64.41" 64.41" D 40.11" 40.11" 51.93" 51.93" 63.74" 63.74" E 17.03" 22.93" 17.03" 22.93" 17.03" 22.93" F 11.43" 11.43" 11.43" 11.43" 11.43" 11.43" G 23.54" 29.52" 23.54" 29.52" 23.54" 29.52" H 13.51" 17.57" 13.51" 17.57" 13.51" 17.57" I 7.93" 11.12" 7.93" 11.12" 7.93" 11.12" J 26.82-44.34" 26.82-44.34" 26.82-44.34" 26.82-44.34" 26.82-44.34" 26.82-44.34" K 5.5" 5.5" 5.5" 5.5" 5.5" 5.5" *K 1 2.87" 2.87" 2.87" 2.87" 2.87" 2.87" *K 1 - Low Profile caster option. • Concept™ worktable frame consist of a pair of legs, rear case, and front rail. • Depth of Concept™ table frame is 23.62", 29.5” or 35.43” with the use of depth kit. • Concept™ frames are available in widths: 39.37“, 47.24”, 59.05”, 70.86” and 78.74” • Table frames can be easily equipped with any 12mm stem caster. Steel Thickness: Steels used in the construction of the frames are 12, 14 and 16 gauge CRS steel, except as follows: • Leg attachment parts: 7 gauge CRS steel • Cable rail: 20 gauge CRS steel Concept™ Workstation - Manual • Leg pair Concept™ 30 can support 1100 lb load, evenly loaded. • Concept™ 30 can be equipped with tilting mechanism. The tilting frame is for width 59.05”. Tilting frame is equipped with motor, which can tilt 85 lb load. Maximum tilting angle is 50 degrees. • Height adjustment of Concept™ 30 frame is 26.62” - 44.34” with 1” table top and adjustment glide. Height adjustment is made by adjusting telescoping legs and tightening friction screws on the back and sides of the legs. • Table frames can be easily equipped with any 12mm stem caster. A E F J I G K, K 1 C D H B