Ergonomic workspaces 02-2020

37 F. Roller profiles 12-13 • First insert the roller profile towards the rear assembly rail at the higher end and under the longer clips, and then pull it back and insert it under the clips of the front assembly rail. • The side profiles of the roller top guide the item and there- fore flanged roller profiles are not needed on the sides. In the middle of the roller top, you should use either flanged roller profiles to divide the two tracks, or a divider rail pair if solid guidance is needed (e.g. for cardboard boxes or other flexible products). Flexible or heavy items may need additional roller profiles in the middle of the track. G. Other parts for assembly 14, 15 • The U-profile is used to prevent the roller profile from open- ing under heavy loads. The U-profile is the solution rec- ommended for FlexFlows in frequent use. This product is a safety device and is highly recommended! • Brake for roller profiles i. Stopper rails are not designed to stop heavy items trav- elling at full speed. ii. The speed of the item can be adjusted using the roller top angle. The brakes are used in FlexFlow™ to control the acceleration of the item. This is essential for smooth product flow. iii. Brakes are needed on most FlexFlows. They are highly recommended! Accessories: See pages 48-71. Frame supports for all FlexFlow™ shelving picture no name size inches Order No ESD Order No 1 Frame support with adj glide 72.83 852535-49 • 1 Frame support with locking caster 77.79 852524-41 • 852524-49 • 1 Frame support with non-locking caster 77.79 852523-41 • 852523-49 • 2 Spacer bar, depth 35.43 852459-49 • 3 Corner bracket pair 848336-49 • 4 Straight bracket 851827-49 • Other parts for assembling picture no name size inches Order No 13 Divider rail pair 35.43 852512-49 13 Divider rail pair 70.86 852513-49 14 U-profile 35.43 852578-49 14 U-profile 70.86 852579-49 15 Brake, roller profiles 852546-49 FlexFlow™ workstation accessories name size W x D inches max lbs Order No Table top brackets, pair 132 860139-49 • Postformed worksurface 48 x 24 132 14-9684103 • ESD postformed worksurface 48 x 24 132 14-9704903 • All module sized accessories can be used with FlexFlow™, e.g. Light/balancer rails and shelves Components for FlexFlow™ M30 M36 M53 picture no name size inches Order No size inches Order No size inches Order No 5 Spacer bar M30 851483-49 • M36 840106-49 • M53 854862-49 6 Horizontal tube M30 847402-49 • M36 840104-49 • M53 850914-49 7 Roller top 35.43” M30 x 35.43” 852502-49 • M36 x 35.43” 852505-49 • M53 x 35.43” 850902-49 7 Roller top 70.86” M30 x 70.86” 852503-49 • M36 x 70.86” 852506-49 • M53 x 70.86” 850903-49 8 Loading/unloading shelf M30 852519-49 • M36 852520-49 • M53 850907-49 9 Assembly rail pair M30 852517-49 • M36 852518-49 • M53 850909-49 10 Cover rail, loading open end M30 852525-49 • M36 852526-49 • M53 850913-49 11 Stopper/cover rail, unloading end stop M30 852515-49 • M36 852516-49 • M53 850911-49 Components for FlexFlow™ picture no name size inches with flange Order No ESD Order No with flange Order No ESD Order No 12 Roller profile, loading/unloading shelf 13.77 852591-00 852726-00 852508-00 852730-00 12 Roller profile 35.43 33.46 852592-00 • 852727-00 • 852509-00 • 852731-00 • 12 Roller profile 70.86 68.89 852593-00 • 852728-00 • 852510-00 • 852732-00 • 12 Roller profile 106.29 104.33 852594-00 852729-00 852511-00 852733-00 12 Roller profile 141.73 139.76 852722-00 852724-00 852723-00 852725-00 *Other roller materials available. FlexFlow™ can be equipped with casters! See page 42. WORKBENCHES FLEXFLOW™ Ergonomic workspaces product catalog www.treston.us