Treston - ESD workspaces 53 Document holder Low M-divider hoops LDH Adjustable cart TRTA Name Size W x D x H inches Shelf size W x D inches Max load lbs Order No ESD 2-shelf cart* 35.04” x 20.87” x 40.16” 31.50” x 16.93” 330 TRTA4082ESD 2-shelf cart* 42.91” x 20.87” x 40.16” 39.37” x 16.93” 330 TRTA4102ESD 2-shelf cart* 35.04” x 24.80” x 40.16” 31.50” x 20.87” 330 TRTA5082ESD 2-shelf cart* 42.91” x 24.80” x 40.16” 39.37” x 20.87” 330 TRTA5102ESD 4-shelf cart** 42.91” x 20.87” x 59.65” 39.37” x 16.93” 660 TRTA4104ESD 4-shelf cart** 42.91” x 24.80” x 59.65” 39.37” x 20.87” 660 TRTA5104ESD * Shelf adjustments between 7.87”-30.32” ** Shelf adjustments between 8.46”-52.76” For general use in workshops, offices, production areas and hospitals. Epoxy powder coated RAL 7035 ESD shelves, depth 1.10”. All shelves are individually adjustable. The structure is light but sturdy. The end-frames of the cart are made of round, powder coated steel tube (1”). Four turning casters (Ø 4.92”), two of which have brakes. Extra shelves TRHA Name Shelf size W x D inches Max load lbs Order No ESD Extra shelf 31.50” x 16.93” 110 TRHA408ESD Extra shelf 39.37” x 16.93” 110 TRHA410ESD Extra shelf 31.50” x 20.87” 110 TRHA508ESD Extra shelf 39.37” x 20.87” 110 TRHA510ESD End mesh panels NET2 Name Size W x D inches Set Order No ESD End mesh panel 23.78” x 14.33” Incl. 2 panels NET2ESD The mesh panels can be installed at the ends of the cart or on the sides. An angle bracket is set on the edge of the upper and lower shelf and the mesh is screwed into place. The 4-shelf cart can hold 2 mesh panels on top of each other. Document holder DSA4 Name Size Order No ESD Document holder A4 DSA4ESD Semiconductive epoxy powder coated steel. Includes two magnets. Low M-divider hoops LDH Name Size Order No Divider hoops 18.11” x 12.4” LDH Steplessly adjustable. 4 pcs per set. M-shape (the lowest point 14.13” from shelf). Suitable only 16.93” deep shelves. Adjustable cart TRTA CARTS TRTA cart
RkJQdWJsaXNoZXIy NDk0Mw==