21 TRESTON - ERGONOMICS | ESD | LEAN Certificate of Qualification Q514/2017 V1.1 15.3.2017 Toni Viheriäkoski Cascade metrology Oy, Hakulintie 32, 08500 Lohja toni.viheriakoski@cascademetrology.com 1/1 Certificate of Qualification Cleanroom Suitability of Treston Concept and WB Workstations The cleanroom suitability of Treston Concept and WB workstations was assessed in the cleanroom of ISO 14644-1 class 7, February 2017. The requirements of ISO class 7 were met at rest and in operation. Summary of the qualification is shown in Table 1. Detailed information is presented in a technical report C514/2017. Table 1: General Information Client Treston Oy, Sorakatu 1, 20730 Turku Contact Kimmo Lehti, +358 50 395 8562, kimmo.lehti@treston.com Dates of Test February 9 – 16, 2017 Place of Test Cascade Metrology, Electrostatics Laboratory, Hakulintie 32, 08500 Lohja GSM +358 4456 88 599 Conditioning ISO Class 7, RH = (25 ± 5) %, T = (23 ± 3) °C Samples under Test Sample 1: Concept motorized ESD workstation 10349015P+TT10060-ESD with accessories, SN 5219, 01/2017 Sample 2: WB811 EL ESD motorized workstation with accessories SN 7154, 01/2017 Test Equipment Particle counter Climet Cl 500 SN 956475, Temperature and humidity meter Vaisala HM 41 SN M1850876, Sensor Vaisala HMP 113 SN M1750872 Assessment Criteria EN ISO 14644-1:2015 Cleanrooms and associated controlled environments - Part 1: Classification of air cleanliness by particle concentration Summary of Results Requirements of ISO class 7 were met at rest and in operation. The requirements of ISO class 6 were also met at rest with the large particle sizes > 0.5 µm. Note This certificate may only be reproduced in full, except with the prior written permission by issuing laboratory. The results relate only to the tested items. Date and place Author Lohja 15.3.2017 Toni Viheriäkoski, CEO, Cascade Metrology, ESD Engineer Certificate of Qualification Q515-1/2017 V1.1 15.3.2017 Toni Viheriäkoski Cascade metrology Oy, Hakulintie 32, 08500 Lohja toni.viheriakoski@cascademetrology.com 1/1 Certificate of Qualification Cleanroom Suitability of Chair Treston Ergo C20PU-ESD The cleanroom suitability of Treston Ergo C20PU-ESD chair was assessed in the cleanroom of ISO 14644-1 class 7, February 2017. The requirements of ISO class 7 were met at rest and in operation. Summary of the qualification is shown in Table 1. Detailed information is presented in a technical report C515/2017. Table 1: General Information Client Treston Oy, Sorakatu 1, 20730 Turku Contact Kimmo Lehti, +358 50 395 8562, kimmo.lehti@treston.com Dates of Test February 26th – March 1st, 2017 Place of Test Cascade Metrology, Electrostatics Laboratory, Hakulintie 32, 08500 Lohja GSM +358 4456 88 599 Conditioning ISO Class 7, RH = (25 ± 5) %, T = (23 ± 3) °C Samples under Test Treston Ergo C20PU-ESD Chair, 20015654, 9651C, 2401978/002, 02.09.2016 Test Equipment Particle counter Climet Cl 500 SN 956475, Temperature and humidity meter Vaisala HM 41 SN M1850876, Sensor Vaisala HMP 113 SN M1750872 Assessment Criteria EN ISO 14644-1:2015 Cleanrooms and associated controlled environments - Part 1: Classification of air cleanliness by particle concentration Summary of Results Requirements of ISO class 7 were met at rest and in operation. The requirements of ISO class 6 were also met at rest with the large particle sizes > 0.5 µm. Note This certificate may only be reproduced in full, except with the prior written permission by issuing laboratory. The results relate only to the tested items. Date and place Author Lohja 15.3.2017 Toni Viheriäkoski, CEO, Cascade Metrology, ESD Engineer Page 1 of 2 This document is issued by the Company under its General Conditions of Service accessible at http://www.sgs.com/terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. CERTIFICATE FI/40659/M1 Our Ref. HEL-CERT200400183-02 Product Working place luminaire with LED module Type TNL series Trademark Certificate Holder Stera Technologies Oy Tierankatu 5 A FI-20520 Turku Finland Technical information DS-14-56W, 220-240V, 50/60Hz, class I, IP20, ta 50 °C Other information - The product is certified according to the following standard(s) EN 60598-2-1:1989 EN 60598-1:2015 Validity This certificate is valid until 2022-11-07 provided that the Conditions for FI certification are met. This certificate includes the right to use the FI mark under the condition that changes (if any) will be checked at SGS Fimko before the product is brought onto market and that the conditions for FI certification are met. Date of issue 2021-06-15 SGS Fimko Ltd Signature Peter Fagerstedt Certification Manager Certificate of Qualification Q518/2017 V1.0 18.3.2017 Toni Viheriäkoski Cascade metrology Oy, Hakulintie 32, 08500 Lohja toni.viheriakoski@cascademetrology.com 1/1 Certificate of Qualification ESD control items – Workstations Treston Concept and WB ESD-control characteristics of Treston Concept and WB workstations were assessed in accordance with IEC 61340-5-1 and IEC 61340-2-3. Summary of the qualification is shown in Table 1. Detailed information is presented in a technical report C518/2017. Table 1: General Information Client Treston Oy, Sorakatu 1, 20730 Turku Contact Kimmo Lehti, +358 50 395 8562, kimmo.lehti@treston.com Dates of Test March 12 - 17, 2017 ( C518/2017) Place of Test Cascade Metrology, Electrostatics Laboratory, Hakulintie 32, 08500 Lohja GSM +358 4456 88 599 Conditioning 48 hours, RH = (12 ± 3) %, T = (23 ± 2) °C Samples under Test Sample 1: Concept motorized ESD workstation 10349015P+TT10060-ESD with accessories, SN 5219, 01/2017 Sample 2: WB811 EL ESD motorized workstation with accessories SN 7154, 01/2017 Test Equipment BMM2000ESD Sn /1387, HM41 Sn M1850876, Cylindrical electrode Vermason 222008, Concentric ring electrode Vermason 222002 Test Method(s) IEC 61340-2-3:2016, Edition 2.0, Electrostatics – Part 2-3: Methods of test for determining resistance and resistivity of solid materials used to avoid electrostatic charge accumulation Assessment Criteria IEC 61340-5-1:2016, Edition 2.0, Electrostatics – Part 5-1: Protection of electronic devices from electrostatic phenomena Summary of Results The samples met the requirements of working surfaces according to IEC 61340-5-1. Resistance to groundable point and point to point resistances were below 1 × 109 Ω. Results and observations are presented in a technical report C518/2017. Note This certificate may only be reproduced in full, except with the prior written permission by issuing laboratory. The results relate only to the tested items. Date and place Author Lohja 18.3.2017 Toni Viheriäkoski, CEO, Cascade Metrology, ESD Engineer 2years WARRANTY 5years WARRANTY Our standards comply with the highest certification requirements Quality certification ISO 9001 : 2015 Environmental Management System certification ISO 14001 : 2015 Packaging treatment following to EU directives. ESD-approval certification Our ESD products fulfill the basic requirements of IEC 61340-5-1. GS certification for lighting Cleanroom Suitability of Treston Concept and WB Motorized Workstations ISO 14644-1, class 7 Cleanroom Suitability of Chair Treston Ergo C20PU-ESD ISO 14644-1, class 7 ESD certification Treston WB and Concept workstations fulfill the basic requirements of IEC 61340-5-1 To obtain a copy of our certificates, please contact info@treston.com. ! The warranty period for products manufactured by Treston is 5 years from the date of delivery; this excludes workbench tops, electronic components, custom made parts and normal wear and tear items, for which there is a guarantee period of 2 years.
RkJQdWJsaXNoZXIy NDk0Mw==