Specifications 23 TRESTON LAB BENCHES - 800-437-6772 | treston.us Tools needed for Concept Ergo frame assembly: • 19 mm wrench • 13 mm wrench • 5 mm allen wrench • #2 Phillips head screwdriver Tools needed for Cornerstone frame assembly: • 10 mm wrench • 8 mm allen wrench Recommended table top assembly: • Treston laminate tops assembled with wood screws provided • Treston phenolic tops can be assembled in 2 ways: - Mechanical fasteners (screws) - Pre-drill a pilot hole in the bottom of the work surface, taking care to keep from penetrating through the top. The pre-drilled hole should be the same length as the screw shaft. The screw should be slightly larger in diameter than the pilot hole. Use a coarse threaded screw, wood or machine. - Adhesive - Use 100% silicon. Apply several “spots” or a continuous bead to the top of the table frame. Position the work surface as centered on the frame and let cure for 12 hrs at room temp. Concept Ergo Motor • Leg pair of Concept Ergo motorized frame can support a static load of 1100 lbs, evenly loaded on a worktop and a dynamic load of 880 lbs, evenly loaded. • Frames are available in depths of 23.34”, 29.25” and 35.16”. • Frames are available in widths of 39.37“, 47.24”, 59.05”, 70.86” and 78.74” • Height adjustment range of Concept Ergo motorized frame is 27.56" - 43.31” with adjustment glides. Adjustment is made with 2 linear actuators, using an up/down memory desk switch. • The desk switch can be installed on the front, left or right side of frame. • The desk switch has multi position memory system to be able to set the frame to three customer based heights and up-down buttons for random settings. • All units have soft-start and soft-stop circuitry. • The table can be manually driven over the memory positions. • Capable of operations in ambient temperature 41 to 104 degrees Fahrenheit • Table frames can be easily equipped with any 12 mm stem caster. Steel Thickness: Steels used in the construction of the frames are 12, 14 and 16 gauge CRS steel, except as follows: • Leg attachment parts: 7 gauge CRS steel • Cable rail: 20 gauge CRS steel 24" x 48" 30" x 48" 24" x 60" 30" x 60" 24" x 72" 30" x 72" A 47.24" 47.24" 59.06" 59.06" 70.86" 70.86" B 23.34" 29.25" 23.34" 29.25" 23.34" 29.25" C 41.9" 41.9" 52.7" 52.7" 64.5" 64.5" D 40.10" 40.10" 51.90" 51.90" 63.71" 63.71" E 9.84" 9.84" 9.84" 9.84" 9.84" 9.84" F 11.42" G 23.62" 29.45" 23.62" 29.45" 23.62" 29.45" H 15.45" I 12.6" J 26.43"-42.06" K 5.59" *K 2.87" L 6.26" 12.3" 6.26" 12.3" 6.26" 12.3" M 38.81" 38.81" 50.6" 50.6" 62.41" 62.41" *K - Low Profile caster option A F D H M M C B J I K G E L
RkJQdWJsaXNoZXIy NDk0Mw==