24 TRESTON LAB BENCHES - 800-437-6772 | treston.us Concept Ergo Manual • Concept Ergo worktable frame consist of a pair of legs, rear case, and front rail. • Depth of Concept Ergo table frame is 23.34", 29.25” or 35.16” with the use of depth kit. • Concept Ergo frames are available in widths: 39.37“, 47.24”, 59.05”, 70.86” and 78.74” • Leg pair of Concept Ergo 30 can support 1100 lb load, evenly loaded. • Height adjustment of Concept Ergo frame is 27.56"-43.31" with adjustment glides. Height adjustment is made by adjusting telescoping legs and tightening friction screws on the back and sides of the legs. • Table frames can be easily equipped with any 12 mm stem caster. Steel Thickness: Steels used in the construction of the frames are 12, 14 and 16 gauge CRS steel, except as follows: • Leg attachment parts: 7 gauge CRS steel • Cable rail: 20 gauge CRS steel 24" x 48" 30" x 48" 24" x 60" 30" x 60" 24" x 72" 30" x 72" A 47.24" 47.24" 59.06" 59.06" 70.86" 70.86" B 23.34" 29.25" 23.34" 29.25" 23.34" 29.25" C 41.9" 41.9" 52.7" 52.7" 64.5" 64.5" D 40.10" 40.10" 51.90" 51.90" 63.71" 63.71" E 9.84" 9.84" 9.84" 9.84" 9.84" 9.84" F 11.42" G 23.62" 29.45" 23.62" 29.45" 23.62" 29.45" H 15.45" I 12.6" J 26.43"-42.06" K 5.59" *K 2.87" L 6.26" 12.3" 6.26" 12.3" 6.26" 12.3" *K - Low Profile caster option Concept Hand Crank • Pair of legs of crank frame can support 440 lb dynamic load, and 1100 lb static load, evenly loaded. • Frames are available in depths of 23.6”, 29.5” and 35.43" • Frames are available in widths of 39.4“, 47.2”, 59.1” and 71.1”. • Height adjustment of crank frame is 26.6"-40.4". • The crank handle can be installed on the left or right side of the frame. Standard table configuration is right hand crank. • Height adjustment change one inch per each full rotation of the crank handle. • The crank folds away under the frame when not in use. • Table frames can be easily equipped with any 12 mm stem caster. • Crank handle mounts to right side of workstation. Steel Thickness: Steels used in the construction of the frames are 12, 14 and 16 gauge CRS steel, except as follows: • Leg attachment parts: 7 gauge CRS steel • Cable rail: 20 gauge CRS steel 24" x 48" 30" x 48" 24" x 60" 30" x 60" 24" x 72" 30" x 72" A 47.24" 47.24" 59.06" 59.06" 71.10" 71.10" B 20.98" 27.72" 20.98" 27.72" 20.98" 27.72" C 40.33" 40.33" 52.15" 52.15" 63.96" 63.96" D 40.10" 40.10" 51.90" 51.90" 63.71" 63.71" E 8.09" F 11.42" G 24.33" 29.45" 24.33" 29.45" 24.33" 29.45" H 11" 18.28" 11" 18.28" 11" 18.28" I 9.27" J 26.60"-40.40" K 5.59" *K 2.87" L 8.06" *K - Low Profile caster option A F D H C B J I K G E L
RkJQdWJsaXNoZXIy NDk0Mw==