20 TRESTON - WORKSPACES FOR HAPPIER WORKFACES 3-Upright Model Multi-Task System Upper Structure The Multi-Task System enables users to configure above-the-worksurface storage and options on a new or existing workbench. The MTS is available in two models: MTS-I with three uprights for side-by-side shelves and options, and MTS-II with two uprights that allow full width shelves and options. Each twelve-gauge steel, double slotted upright is 48” x 2” wide x 1–7/8” deep. MTS upper structures will fit most benches, provided there is a clear 1.5” overhang in the rear. MTS-I Upright Structures Width inches Max load lbs Order No. SKY blue Order No. EZE blue 60" 250 QS-1022532-D QS-1022532-BL 72" 250 QS-1022533-D QS-1022533-BL 96" 250 QS-1022535-D QS-1022535-BL 3 Posts provide 2 side-by-side racks. These posts are 16 cold rolled steel with a tie beam at the top of the system for extra support. These mount to a 1.25" or 1.75" worksurface. Overall installed height is 50". MTS-I Electrical Channel Width inches No. of outlets Suitability Order No. SKY blue Order No. EZE blue 28" 6 MTS-I / 60" QS-1022742-D QS-1022742-BL 34" 6 MTS-I / 72" QS-1022743-D QS-1022743-BL 46" 8 MTS-I / 96" QS-1022745-D QS-1022745-BL Mounted to 14-gauge brackets and can be positioned where electrical access is needed most. Includes an 8-ft. molded power cord and a 15-amp circuit breaker; wired for 15-amp, 120-volt AC; meets UL requirements and is ETL approved. MTS-I Utility Shelves D x W inches Suitability Max load lbs Order No. Order No. ESD SKY Blue 12" x 26" MTS-I / 60" 75 QS-1022602-D QS-1022622-D 12" x 32" MTS-I / 72" 75 QS-1022603-D QS-1022623-D 12" x 44" MTS-I / 96" 75 QS-1022605-D QS-1022625-D EZE blue 12" x 26" MTS-I / 60" 75 QS-1022602-BL QS-1022622-BL 12" x 32" MTS-I / 72" 75 QS-1022603-BL QS-1022623-BL 12" x 44" MTS-I / 96" 75 QS-1022605-BL QS-1022625-BL Provides off the worksurface storage. Shelf angle is adjustable from 0-15 degrees and is formed from 16-gauge steel; shelf lip acts as a parts bin rail. ESD version includes white laminate surface. MTS-I Multi Bin Panel W x H inches Suitability Max load lbs Order No. SKY Blue 28" x 6" MTS-I / 60" 75 QS-1022722-D 34" x 6" MTS-I / 72" 75 QS-1022723-D 46" x 6" MTS-I / 96" 75 QS-1022725-D EZE blue 28" x 6" MTS-I / 60" 75 QS-1022722-BL 34" x 6" MTS-I / 72" 75 QS-1022723-BL 46" x 6" MTS-I / 96" 75 QS-1022725-BL ESD black 28" x 6" MTS-I / 60" 75 QS-1022732 34" x 6" MTS-I / 72" 75 QS-1022733 46" x 6" MTS-I / 96" 75 QS-1022735 Multi Bin Panel is 18 gauge bin panel and welded to 14-gauge brackets, there are 6 rails per section and accepts industry standard parts bins; ideal for stacking when a large number of bins are used. QUICKSHIP IAC Workmaster accessories
RkJQdWJsaXNoZXIy NDk0Mw==